12-Pack Solar Ground Lights with Warm Diamond-Cut Pathway Lighting, IP67 Waterproof

Illuminate walkways, garden beds, driveways, patios, and other outdoor areas with this 12-pack of solar-powered ground lights. Each compact disc light features a diamond-cut acrylic lens designed to spread a soft, wide, prism-like warm glow while reducing direct glare.

High-efficiency solar panels recharge the built-in batteries during the day, and the lights turn on automatically after dark. Multiple installation options allow them to be staked into soil or mounted on suitable hard surfaces without electrical wiring.

Key Features

• Set of 12 solar ground lights

• Warm ambient illumination

• Diamond-cut acrylic lens

• Wide, prism-like light pattern

• Designed to reduce harsh glare

• Automatic dusk-to-dawn operation

• Solar powered with no electrical wiring

• Charges in approximately 4–6 hours of direct sunlight

• Manufacturer-rated runtime of more than 12 hours

• IP67 water- and dust-resistance rating

• Rust-resistant acrylic and ABS construction

• Manufacturer-rated load capacity up to 2 tons

• Ground-stake installation for soil

• Adhesive or screw mounting for suitable hard surfaces

• Compact 2.83" square housing

• Suitable for outdoor landscape and accent lighting

Diamond-Cut Lighting Design

The upgraded diamond-patterned acrylic lens refracts the light into a broader, decorative pattern. Instead of concentrating illumination into a harsh point, the textured surface creates a softer glow across nearby ground surfaces.

This design works well for outlining:

• Walkways and paths

• Garden beds

• Driveway edges

• Decks and patios

• Poolside landscaping

• Steps and borders

• Courtyards and lawns

These are decorative pathway and orientation lights. Brightness output is not specified, so they should not be treated as substitutes for high-output security or task lighting.

Solar Charging and Automatic Operation

Integrated solar panels collect energy during daylight and recharge the built-in batteries. Once switched on, the lights automatically illuminate at night and turn off when sufficient daylight returns.

Manufacturer-stated performance:

• Charging time: Approximately 4–6 hours in direct sunlight

• Nighttime runtime: More than 12 hours after a full charge

Actual charging and operating time will vary with direct-sun exposure, geographic location, season, temperature, weather, shade, panel cleanliness, battery condition, and selected placement.

IP67 Outdoor Construction

The acrylic and ABS housings are designed for outdoor exposure and carry an IP67 rating. This rating provides protection against dust and temporary water exposure under applicable test conditions.

The lights are suitable for typical rain, snow, frost, and landscape moisture. IP67 does not mean they should be permanently submerged, installed in standing water, or used as underwater pool lights.

Heavy-Duty Ground Design

The manufacturer rates each light to withstand pressure of up to 2 tons, allowing appropriate placement near driveways and other ground-level areas.

Load performance depends on correct installation and full support beneath the housing. Do not position a light over a hollow space, uneven surface, loose soil, or location where concentrated impact may occur. The load rating should not be interpreted as approval for roadway, commercial traffic, or public-safety applications.

Three Installation Options

Ground-Stake Installation

Attach the stake and insert the light vertically into loosened soil. This method is suitable for lawns, garden beds, and pathway borders.

Adhesive Installation

Peel the backing from the adhesive and attach the light to a clean, dry, compatible surface. Adhesive performance may vary with the surface material, moisture, temperature, and exposure.

Screw Installation

Use the included screws to mount the light to an appropriate wood or compatible solid surface. Verify that drilling or fastening will not damage wiring, plumbing, waterproof membranes, or the underlying structure.

No electrical wiring is required. Basic tools may be necessary when using the screw-mounting method.

Specifications

• Product type: Solar ground and pathway lights

• Quantity: 12 lights

• Light color: Warm

• Lens design: Diamond cut

• Lens material: Acrylic

• Housing material: ABS and acrylic

• Power source: Solar

• Operation: Automatic nighttime illumination

• Charging time: Approximately 4–6 hours in direct sunlight

• Manufacturer-rated runtime: More than 12 hours after a full charge

• Weather rating: IP67

• Manufacturer-rated load capacity: Up to 2 tons

• Installation methods: Ground stake, adhesive, or screws

• Dimensions per light: 2.83" L × 2.83" W × 1.5" H

• Stake height: Not included in the listed dimensions

• Battery type and capacity: Not specified

• Lumen output: Not specified

• Color temperature: Not specified

• Brand: Not specified

What’s Included

• 12 solar ground lights

• Ground stakes

• Adhesive mounting backings

• Mounting screws

Exact quantities of stakes, adhesive pieces, and screws are not provided in the supplied product information.

Ideal For

• Residential walkways

• Garden borders

• Landscape beds

• Driveway edges

• Patios and decks

• Poolside landscaping

• Courtyards

• Lawn accents

• Outdoor steps and boundaries

• Decorative nighttime guidance

Why They Stand Out

This 12-light set combines a compact ground-level profile with a diamond-cut lens that creates a wider, softer light pattern. Solar charging eliminates the need for power cables, while three installation methods make the lights adaptable to both soil and compatible hard surfaces.

The IP67-rated housing and manufacturer-stated load capacity also make them suitable for more exposed landscape locations when installed correctly.

Installation Tips

• Place the lights where each solar panel can receive direct sunlight.

• Avoid locations shaded by trees, fences, roofs, or buildings.

• Turn each light on before charging.

• Allow a full day of direct sunlight before evaluating nighttime performance.

• Clean the mounting surface before applying adhesive.

• For soil installation, loosen compacted ground with a shovel or suitable garden tool.

• Insert the stake vertically and press gently.

• Never hammer the light or force it into frozen, rocky, or compacted soil.

• Relocate the light if the soil cannot be loosened safely.

• Ensure the entire base is evenly supported in load-bearing locations.

• Do not install where water regularly pools.

Care and Maintenance

• Wipe the solar panels regularly with a soft, damp cloth.

• Remove leaves, dirt, snow, and debris that may block sunlight.

• Do not use abrasive cleaners on the acrylic lenses.

• Check stakes and mounting hardware periodically.

• Reposition lights seasonally if surrounding vegetation begins blocking sunlight.

• Reduced winter runtime may be normal because of shorter daylight hours and colder temperatures.

• Do not immerse the lights or use them underwater.

Frequently Asked Questions

How many lights are included?

The set includes 12 solar ground lights.

What are the dimensions of each light?

Each housing measures approximately 2.83" L × 2.83" W × 1.5" H, excluding the ground stake.

What color light do they produce?

They emit a warm ambient light. An exact color-temperature rating is not specified.

Do they require electrical wiring?

No. They use integrated solar panels and built-in rechargeable batteries.

Do they turn on automatically?

Yes. Once switched on and charged, they are designed to illuminate automatically at night and turn off during daylight.

How long do they take to charge?

The manufacturer states approximately 4–6 hours in direct sunlight.

How long do they stay illuminated?

The manufacturer rates them for more than 12 hours after a full charge. Actual runtime depends on sunlight, weather, temperature, placement, and battery condition.

Are they waterproof?

They carry an IP67 rating for outdoor dust and water resistance. They are not intended for permanent submersion or underwater use.

Can a vehicle drive over them?

The manufacturer states a load capacity of up to 2 tons. Correct, evenly supported installation is essential, and the rating should not be treated as approval for public roads or repeated commercial traffic.

Can they be installed on a deck?

Yes. They may be mounted to a compatible hard surface using adhesive or screws. Confirm that the chosen method is appropriate for the deck material.

How should they be installed in hard soil?

Loosen the soil first with a shovel or garden tool, then insert the stake vertically. Do not force or hammer the light into compacted or frozen ground.

Are the batteries replaceable?

The battery type, capacity, and replacement procedure are not specified. Refer to the product manual or packaging for battery information.