Athletic Works Adjustable Batting Tee for Baseball, Softball and T-Ball Training, 25"–39"

Build more consistent batting mechanics with the Athletic Works Adjustable Batting Tee. Designed for baseball, softball and T-ball practice, the tee adjusts from 25 to 39 inches high to support different players, batting stances and strike-zone locations.

A flexible rubber ball holder is made to withstand repeated contact, while the heavy-duty steel tripod base and rubber feet provide a stable platform for hitting drills. When practice is over, the legs fold inward for compact storage and convenient transportation.

Key Features

• Adjustable batting height from 25 to 39 inches

• Suitable for baseball, softball and T-ball training

• Helps players practice swing mechanics and contact

• Flexible, durable rubber ball holder

• Heavy-duty steel tripod base

• Rubber feet improve grip and protect compatible surfaces

• Wide 23" × 23" base when fully opened

• Folding design for storage and transport

• Compact enough to fit many standard bat bags

• Suitable for backyard, field or batting-cage practice

• Assembly instructions included

Adjustable 25- to 39-Inch Height

Raise or lower the tee to practice hitting pitches at different points in the strike zone. The 14-inch adjustment range supports:

• Low-pitch drills

• Middle-zone contact practice

• High-pitch training

• Inside and outside placement drills

• Players of different heights

• Baseball, softball and T-ball fundamentals

Secure the height adjustment completely before placing a ball on the tee.

Baseball, Softball and T-Ball Training

The tee provides a stationary ball position that allows players to focus on specific parts of their swing without requiring a pitcher.

It can help support practice in:

• Batting stance

• Hand position

• Swing path

• Hip rotation

• Contact point

• Balance

• Follow-through

• Hitting to different fields

Practice results depend on consistent instruction, repetition and proper technique.

Flexible Rubber Ball Holder

The upper ball holder is made from flexible rubber designed to absorb occasional bat contact. Its flexible construction helps reduce resistance when the batter swings through the ball.

Repeated direct strikes may still cause wear over time. Position the ball correctly and inspect the rubber holder regularly for cracks, splits or deformation.

Heavy-Duty Steel Tripod Base

Three folding steel legs create a broad base measuring approximately 23 inches wide by 23 inches deep when fully opened.

Rubber feet help the tee grip compatible surfaces and reduce unwanted movement during normal training. For best stability, place all three feet on a flat, level surface.

Foldable, Portable Design

The tripod legs fold inward when the tee is not in use, reducing its footprint for transportation and storage. The folded design fits many standard bat bags, although compatibility will depend on the bag’s dimensions.

Use it for:

• Backyard batting practice

• Team warmups

• Batting cages

• Baseball fields

• Softball fields

• T-ball instruction

• Individual swing drills

• Travel practice

What’s Included

• 1 × Athletic Works adjustable batting tee

• Assembly instructions

Baseballs, softballs, bats, batting nets and other training accessories are not identified as included.

Specifications

• Brand: Athletic Works

• Product type: Adjustable tripod batting tee

• Compatible sports: Baseball, softball and T-ball

• Minimum height: 25 in./63.5 cm

• Maximum height: 39 in./approximately 99 cm

• Maximum assembled dimensions: 39" H × 23" W × 23" D

• Base style: Folding tripod

• Base material: Steel

• Ball-holder material: Flexible rubber

• Feet: Rubber

• Storage design: Foldable

• Recommended location: Indoor training area or outdoor field

• Assembly required: Yes

• Assembly instructions included: Yes

• Recommended age: Not specified

• Ball included: Not specified as included

• Written warranty: Not specified

Suggested Training Drills

Center Contact

Position the tee at a comfortable mid-zone height and work on driving the ball straight through the middle.

Inside-Pitch Drill

Move the tee slightly forward and toward the batter’s body side to practice turning on an inside pitch.

Outside-Pitch Drill

Move the tee deeper and toward the outer edge of the plate to practice hitting to the opposite field.

High-and-Low Drill

Alternate between lower and higher tee settings to develop a more adaptable swing path.

Placement Challenge

Set up a net or safe target zones and practice directing the ball toward different areas of the field.

Training should be supervised by a qualified adult, coach or instructor when used by children.

Setup Guidelines

1. Choose a flat, open practice area.

2. Fully unfold all three tripod legs.

3. Make sure each rubber foot rests securely on the ground.

4. Assemble the upright section according to the instructions.

5. Adjust the ball holder to the desired height.

6. Tighten or secure the adjustment mechanism.

7. Place the appropriate ball on the rubber holder.

8. Clear the hitting area before every swing.

Care and Safety

• Adult assembly and supervision are recommended for youth players.

• Check the retail packaging for the manufacturer’s minimum age recommendation.

• Use only in a spacious area designed for batting practice.

• Keep all people, pets, vehicles, windows and property clear of the swing and ball path.

• Use a batting net or suitable backstop whenever possible.

• Wear appropriate protective equipment for the sport and training environment.

• Only one person should enter the hitting area at a time.

• Never swing a bat near bystanders.

• Fully open and stabilize the tripod before every session.

• Confirm that the height adjustment is secure.

• Do not sit, stand or place body weight on the tee.

• Inspect the rubber holder, upright, legs and feet before use.

• Stop using the tee if any part is cracked, bent, loose or damaged.

• Wipe the tee clean with a soft, damp cloth.

• Dry metal components after exposure to moisture.

• Fold the legs carefully and keep fingers clear of hinge points.

• Store indoors in a dry location.

Frequently Asked Questions

What sports can this batting tee be used for?

It is designed for baseball, softball and T-ball training.

What is the adjustable height range?

The ball holder adjusts from approximately 25 to 39 inches high.

What are the assembled dimensions?

At its maximum setup, the listed dimensions are approximately 39" H × 23" W × 23" D.

What is the base made from?

The tripod base is made from heavy-duty steel and includes rubber feet.

Is the ball holder flexible?

Yes. The neck and ball holder are made from flexible rubber designed to handle repeated practice.

Does the tee fold?

Yes. The tripod legs fold inward for easier storage and transportation.

Will it fit in a bat bag?

It is described as fitting many standard bat bags, but compatibility depends on the specific bag’s dimensions.

Is a baseball or softball included?

The supplied information lists only the batting tee and assembly instructions. A ball is not confirmed as included.

Does it require assembly?

Yes. Assembly is required, and instructions are included.

Is it suitable for adults and children?

Its 25- to 39-inch adjustment range accommodates many youth and adult players. No specific minimum age is provided, so follow the packaging guidance and supervise children.