Deck Impressions Solar Wall and Fence Lights with Motion Sensor, 400 Lumens, 3-Pack

Add automatic warm-white lighting to fences, deck rails, stairways, exterior walls, porches, patios, and garden areas with this three-pack of Deck Impressions Solar Motion-Sensor Lights. Each fixture offers two selectable operating modes, allowing you to choose low-level accent lighting with a brighter motion response or motion-only illumination.

The solar-powered design requires no household wiring. Integrated dusk-to-dawn sensing limits operation to nighttime hours, while the included rechargeable batteries and mounting hardware support convenient outdoor installation.

Key Features

• Set of three solar-powered outdoor lights

• Warm 3000K LED illumination

• Integrated motion sensor

• Automatic dusk-to-dawn operation

• Two selectable lighting modes

• 50-lumen continuous nighttime lighting in ON+PIR mode

• Brightens to 400 lumens for 30 seconds when motion is detected in ON+PIR mode

• Activates at 200 lumens for 1 minute when motion is detected in PIR mode

• Up to approximately 8 hours of base illumination on a full charge

• No electrical wiring required

• Integrated LEDs require no traditional bulb replacement

• Weather-resistant outdoor construction

• Black finish

• Aluminum, stainless-steel, and polymeric components

• Rechargeable batteries included

• Installation hardware included

Two Motion-Sensor Modes

Choose the operating mode that best suits the location and desired lighting behavior.

ON+PIR Mode

In ON+PIR mode, the light provides low-level illumination after dark and becomes brighter when movement is detected:

• Base output: 50 lumens

• Base-light duration: Up to approximately 8 hours on a full charge

• Motion output: 400 lumens

• Bright-motion duration: 30 seconds

After the motion period ends, the fixture returns to its lower 50-lumen setting while the programmed base-light cycle remains active.

Once the approximately eight-hour base-light period ends, the continuous low-level illumination switches off. The supplied information indicates that the fixture can still respond to motion, but it does not clearly specify the exact brightness or activation duration used after that point.

PIR Mode

In PIR mode, the fixture conserves battery power by remaining off until movement is detected:

• Standby condition: Off

• Motion output: 200 lumens

• Motion-light duration: 1 minute

After one minute without continued detection, the light switches off and returns to motion-sensing standby.

Warm 3000K Light

The integrated LEDs produce a warm 3000K white light. This softer color temperature is well suited for residential outdoor areas where comfortable ambient lighting is preferred over the cooler appearance of commercial security lights.

Recommended locations include:

• Exterior walls

• Fence posts and panels

• Deck rails

• Stairways

• Front and back entrances

• Porches

• Patios

• Walkways

• Garden areas

• Side yards

Automatic Dusk-to-Dawn Sensing

An integrated light sensor prevents unnecessary daytime operation:

• During daylight, the fixture switches off and charges.

• After dark, the selected operating mode becomes active.

• When daylight returns, the light switches off and begins a new charging cycle.

Avoid installing the fixture directly beneath a porch light, streetlight, or another nighttime light source. Artificial light shining on the sensor may prevent proper nighttime activation.

Solar-Powered, Wiring-Free Operation

Each fixture charges its rechargeable battery with solar energy during daylight hours. No electrical wiring or nearby outlet is required.

For best charging performance:

• Install each light where its solar panel receives direct sunlight.

• Avoid shade from roof overhangs, trees, fences, and buildings.

• Keep the solar panel free of leaves, dirt, snow, and debris.

• Allow the batteries to charge fully before evaluating nighttime performance.

Runtime and brightness performance vary according to sunlight intensity, weather, season, geographic location, temperature, selected mode, frequency of motion events, and battery condition.

Durable Outdoor Construction

The fixtures combine an aluminum top cap and bracket with stainless-steel and polymeric components. A black finish provides a clean appearance that coordinates with many fences, deck rails, walls, and outdoor structures.

The lights are described as weather resistant, but no specific IP rating is provided. Do not immerse them, install them where water regularly collects, or expose them to pressure washing.

Low-Maintenance Integrated LEDs

The built-in LEDs do not require conventional bulb replacement. Routine care consists primarily of keeping the solar panels clean, checking the mounting points, and replacing the rechargeable batteries if their capacity eventually declines.

Specifications

• Brand: Deck Impressions

• Product type: Solar wall and fence light

• Pack quantity: 3

• Light source: Integrated LED

• Light color: Warm white

• Color temperature: 3000K

• Sensor types: Motion sensor and dusk-to-dawn light sensor

• Available modes: ON+PIR and PIR

• ON+PIR base output: 50 lumens

• ON+PIR motion output: 400 lumens

• ON+PIR motion duration: 30 seconds

• PIR standby output: Off

• PIR motion output: 200 lumens

• PIR motion duration: 1 minute

• Maximum base-light runtime: Up to approximately 8 hours on a full charge

• Power source: Solar

• Electrical wiring required: No

• Finish: Black

• Construction: Aluminum top cap and bracket, stainless-steel and polymeric components

• Weather resistance: Weather-resistant materials

• Rechargeable batteries: Included

• Installation hardware: Included

• Recommended use: Outdoor walls, fences, decks, walkways, porches, patios, stairs, and garden areas

What’s Included

• Three Deck Impressions solar motion-sensor lights

• Rechargeable batteries

• Installation hardware

Battery type, capacity, and exact hardware quantities are not provided in the supplied product information.

Ideal For

• Exterior walls

• Fence lighting

• Deck rails

• Outdoor stairways

• Front and back entrances

• Porches

• Patios

• Walkways

• Garden areas

• Side yards

• Low-level security and guidance lighting

Installation Tips

• Test each fixture and operating mode before permanent installation.

• Select a location that receives several hours of direct sunlight.

• Confirm that the mounting surface can securely support the fixture.

• Check for concealed wiring, pipes, and other utilities before drilling.

• Use hardware appropriate for the mounting material.

• Position the sensor toward the intended detection area.

• Avoid aiming the sensor toward moving branches, busy roads, reflective surfaces, or heat-producing equipment.

• Keep the solar panel unobstructed.

• Do not install directly beneath another nighttime light source.

• Allow the lights to charge fully before the first nighttime use.

Care and Safety

• Clean the solar panels periodically with a soft, damp cloth.

• Do not use abrasive cleaners, solvents, or pressure washers.

• Remove leaves, dirt, snow, and other debris that may block sunlight.

• Inspect mounting hardware periodically and tighten it when necessary.

• Do not immerse the fixtures in water.

• Do not install where water routinely pools.

• Replace rechargeable batteries only with the correct type and rating.

• Keep batteries away from children.

• Recycle depleted rechargeable batteries according to local regulations.

• Store the fixtures in a clean, dry location if removed for an extended period.

Why They Stand Out

These Deck Impressions lights provide more operating flexibility than a basic dusk-to-dawn solar fixture. ON+PIR mode combines 50-lumen ambient lighting with a 400-lumen motion boost, while PIR mode conserves energy by activating at 200 lumens only when movement is detected.

The three-piece set, warm 3000K output, wiring-free solar operation, and included installation components make it suitable for coordinating lighting across several outdoor locations.

Frequently Asked Questions

How many lights are included?

The package includes three solar motion-sensor lights.

What color is the light?

The integrated LEDs produce warm 3000K white illumination.

What happens in ON+PIR mode?

The light operates at 50 lumens for up to approximately eight hours and brightens to 400 lumens for 30 seconds when motion is detected.

What happens in PIR mode?

The light remains off until motion is detected, then illuminates at 200 lumens for one minute.

What happens after the eight-hour base-light period?

The continuous 50-lumen light switches off. The supplied information indicates that motion can turn the light back on, but it does not clearly state the exact brightness or duration used at that stage.

Does the light operate during the day?

No. The dusk-to-dawn sensor keeps the lighting function off during daylight so the battery can charge.

Does it require electrical wiring?

No. Each fixture is solar powered.

Are batteries included?

Yes. Rechargeable batteries are included.

Is installation hardware included?

Yes. Mounting hardware is included.

How long will the lights operate after charging?

In ON+PIR mode, the base light can operate for up to approximately eight hours on a full charge. Actual runtime varies with sunlight, weather, season, temperature, motion activity, and battery condition.

Are the LED bulbs replaceable?

No conventional bulb replacement is required because the LEDs are integrated into the fixtures.

Are the lights waterproof?

They are made from weather-resistant materials, but no specific IP rating is provided. They should not be submerged or installed where water regularly collects.

Can these lights replace a high-output security floodlight?

They provide a motion-activated brightness increase of up to 400 lumens, but they are better suited for localized wall, fence, deck, and pathway illumination than broad high-output floodlighting.