Hot Wheels Stunt Tracks Rapid Launch Cyclone Track Set with 1:64 Die-Cast Car, 2 Loops & 2 Crash Zones

Launch a Hot Wheels car through two crossing loops and two crash zones with the Hot Wheels Stunt Tracks Rapid Launch Cyclone Track Set. Load the included 1:64-scale die-cast vehicle into the feeder, press the launcher to position it and slam the launcher to send the car onto the track.

A 180-degree curve directs the vehicle back toward the starting area for another run. The feeder can hold up to four compatible 1:64-scale toy cars, allowing players to test how many vehicles can remain on the track before a collision occurs. One Hot Wheels car is included; additional vehicles are sold separately.

Speed Snap Track System components support building and rebuilding, while two included adapters provide reverse compatibility with traditional Hot Wheels track. The set is recommended for children ages 4 and up.

Key Features

• Hot Wheels Rapid Launch Cyclone stunt track set

• Includes one 1:64-scale die-cast Hot Wheels car

• Features two crossing loops

• Includes two designated crash zones

• Slam-style launcher sends vehicles onto the track

• Feeder holds up to four 1:64-scale toy cars

• Supports rapid, successive vehicle launches

• 180-degree curve returns vehicles toward the starting area

• Challenges players to keep multiple cars moving before a collision

• Uses Speed Snap Track System components

• Designed for building and rebuilding track layouts

• Includes two reverse-compatibility adapters

• Connects with traditional Hot Wheels track through the included adapters

• Recommended for children ages 4 and up

• Colors and decorative details may vary

Rapid-Launch Feeder

The feeder can hold up to four compatible 1:64-scale toy cars. Place a vehicle in the feeder, press the launcher to move it into position and then slam-launch it onto the track.

Only one Hot Wheels vehicle is included. Using the feeder at its full four-vehicle capacity requires three additional compatible vehicles, sold separately.

Two Crossing Loops

The track sends vehicles through two crossing loops in rapid succession. Correct setup and vehicle positioning are important for completing the course.

Track performance may vary by vehicle design. Compatibility with every 1:64-scale vehicle is not guaranteed.

Dual Crash Zones

Two crash zones create separate points where vehicles may collide. Adding multiple cars increases the challenge of keeping them moving around the course at the same time.

Collisions are an intended part of the track challenge, but the number and timing of crashes will vary with each run.

180-Degree Return Curve

After passing through the stunt course, a 180-degree curve directs vehicles back toward the starting area. This return path allows the car to continue around the layout for repeated stunt action.

Speed Snap Track System

The set uses Speed Snap Track System components designed to support track assembly and rebuilding. Two included adapters provide reverse Speed Snap compatibility with traditional Hot Wheels track.

Compatibility beyond the stated Speed Snap and traditional Hot Wheels track connection is not provided.

Product Specifications

• Brand: Hot Wheels

• Product line: Stunt Tracks

• Product name: Rapid Launch Cyclone

• Product type: Stunt track set

• Included vehicles: 1

• Included vehicle scale: 1:64

• Included vehicle type: Die-cast Hot Wheels toy car

• Feeder capacity: Up to 4 compatible 1:64-scale toy cars

• Loops: 2 crossing loops

• Crash zones: 2

• Return section: 180-degree curve

• Launch mechanism: Manual slam launcher

• Track system: Speed Snap Track System

• Traditional track adapters: 2 included

• Recommended age: 4 years and up

• Colors and decorations: May vary

• Track material: Not provided

• Assembled dimensions: Not provided

• Battery requirement: None stated

What’s Included

• 1 Hot Wheels Stunt Tracks Rapid Launch Cyclone track set

• 1 Hot Wheels 1:64-scale die-cast toy car

• 2 reverse-compatibility adapters for traditional Hot Wheels track

• Speed Snap Track System components required for the supplied layout

Additional vehicles and traditional Hot Wheels track sections are sold separately.

Ideal For

• Children ages 4 and up

• Hot Wheels stunt-track fans

• Loop and crash-zone challenges

• Single-car or multi-car track play

• Building and rebuilding Hot Wheels layouts

• Expanding a traditional Hot Wheels track system

• Birthday and holiday gifts

Why It Stands Out

• Combines two loops with two crash zones

• Holds up to four vehicles in the launch feeder

• Supports rapid successive launches

• Returns vehicles toward the starting area through a 180-degree curve

• Includes a vehicle for starting play

• Provides adapters for connection with traditional Hot Wheels track

Setup Guidance

Assembly may involve connecting the Speed Snap track components, securing both loops, installing the return curve and positioning the feeder and launcher. Follow the instructions supplied with the exact product for the correct layout and connection sequence.

Before use:

• Assemble the set on a flat, stable surface.

• Confirm that all track joints are fully connected.

• Check that both loops are correctly shaped and secured.

• Install the included adapters only where directed.

• Keep both crash zones and the return path clear.

• Test the layout with the included vehicle before adding more cars.

Required tools, assembly time and assembled footprint are not provided.

How to Use

1. Load the included vehicle into the feeder.

2. Press the launcher to set the vehicle in the launch position.

3. Slam the launcher to send the vehicle onto the track.

4. Allow the car to travel through the loops, crash zones and return curve.

5. Add compatible vehicles one at a time to increase the challenge.

The feeder can hold up to four vehicles, but only one vehicle is supplied with the set.

Compatibility Guidance

The set is designed for 1:64-scale Hot Wheels vehicles and includes adapters for connecting Speed Snap components with traditional Hot Wheels track.

Vehicle performance may differ based on wheel condition, weight, body shape and design. Some 1:64-scale vehicles may not complete the loops or operate consistently in the feeder.

Care and Storage

• Remove all vehicles before moving or storing the track.

• Wipe the track and vehicle with a soft, dry or slightly damp cloth.

• Keep the track surface and vehicle wheels free from dirt and debris.

• Do not soak the components or use abrasive cleaners or strong solvents.

• Avoid bending or placing heavy objects on the loops.

• Separate track components only as directed to avoid damaging the connectors.

• Store the vehicle, adapters and track components together in a dry location.

Safety Information

• Recommended for children ages 4 and up.

• Adult assistance is recommended for initial assembly.

• Keep faces, fingers, hair and loose clothing away from the launcher and moving vehicles.

• Do not aim launched vehicles toward people, animals or breakable objects.

• Place the track away from stairs, walkways and table edges.

• Stop using any vehicle or track component that becomes cracked, broken or detached.

• Follow all assembly instructions and safety warnings provided with the exact product.

Frequently Asked Questions

How many vehicles are included?
One Hot Wheels 1:64-scale die-cast toy car is included.

How many cars can the feeder hold?
The feeder can hold up to four compatible 1:64-scale toy cars.

Are four vehicles included?
No. One vehicle is included. Three additional compatible vehicles are needed to fill the feeder to its four-car capacity.

How are the vehicles launched?
Press the launcher to position the vehicle, then slam the launcher to send it onto the track.

How many loops does the set have?
The track features two crossing loops.

How many crash zones are included?
The layout includes two crash zones.

What does the 180-degree curve do?
It directs vehicles back toward the starting area so they can continue around the track.

Can this set connect to traditional Hot Wheels track?
Yes. Two included adapters provide reverse Speed Snap compatibility with traditional Hot Wheels track.

What is the Speed Snap Track System?
It is the component system used by this set for assembling and rebuilding the track layout.

Will every 1:64-scale car work with the set?
That is not guaranteed. Vehicle performance may vary according to its size, shape, weight and wheel design.

Does the set require batteries?
No battery requirement is stated. The described launcher is manually operated.

Is assembly required?
The track set requires setup and may require assembly. Follow the included instructions for the correct configuration.

What are the assembled dimensions?
The assembled dimensions and required play-space measurements are not provided.

What is the recommended age?
The set is recommended for children ages 4 and up.

Will the included car exactly match the product images?
Not necessarily. Colors and decorative details may vary.