Blue and Clear Christmas Mini String Lights, 100-Count 20FT Incandescent Lights with Twinkle Option, Green Wire

Create a cool, classic holiday display with these blue-and-clear incandescent mini string lights. The 100-count strand uses discreet green wire that blends naturally with Christmas trees, wreaths, garlands, shrubs, and other greenery.

The set can operate steadily or produce a twinkling effect using the two included red-tipped flasher bulbs. With an approximately 19.6-foot lighted length and 2.5-inch bulb spacing, the strand provides consistent coverage for indoor decorations and protected outdoor displays.

Key Features

• 100 blue-and-clear incandescent mini bulbs

• Approximately 20-foot strand

• Listed lighted length: 19.6 feet

• Approximately 2.5-inch bulb spacing

• Green wire blends with trees and greenery

• Steady-on illumination

• Optional twinkle effect using included flasher bulbs

• Two red-tipped flasher bulbs included

• Connectable with up to five compatible strands

• Listed IP44 splash-resistant construction

• Suitable for indoor and protected outdoor decorating

• Extra replacement bulbs and fuses included

• Listed bulb rating: 2.5V/0.425W

• Listed average bulb life: approximately 2,500 hours

• UL-listed or UL-certified claim supplied

• Suitable for Christmas, Halloween, Hanukkah, New Year’s, parties, and winter events

• Assembled product weight: 0.5 pound

Blue and Clear Holiday Glow

The combination of blue and clear bulbs creates a crisp winter-inspired display. Blue lights add a cool seasonal tone, while clear bulbs provide a familiar warm incandescent sparkle.

Suggested decorating locations include:

• Christmas trees

• Garlands and wreaths

• Mantels

• Windows

• Door frames

• Covered porches

• Patio railings

• Balcony railings

• Fences

• Shrubs and small trees

• Party backdrops

• Holiday centerpieces

• Halloween displays

• Hanukkah decorations

• Winter wedding décor

The green wire remains less noticeable against branches and foliage, allowing the illuminated bulbs to remain the visual focus.

100 Incandescent Mini Lights

This strand features 100 traditional incandescent mini bulbs. Incandescent lights produce a distinct warm, sparkling appearance that differs from the sharper output of many LED strings.

The supplied bulb rating is 2.5 volts and 0.425 watts per bulb. At 100 bulbs, the stated individual bulb wattage suggests a substantially higher total load than the separately listed 1-watt product rating. Confirm the complete strand wattage from the product tag or plug label before publication.

Although the product is described as “shatterproof,” traditional incandescent mini bulbs commonly use glass envelopes. Verify the bulb material and construction before advertising them as shatterproof.

Steady or Twinkling Display

The strand can be used in its standard steady-on configuration or converted to a twinkling display with the included red-tipped flasher bulbs.

General flasher-bulb installation:

1. Disconnect the light set from power.

2. Allow the bulbs to cool completely.

3. Select the installation location indicated by the instructions.

4. Remove one regular bulb by holding its plastic base.

5. Insert a compatible red-tipped flasher bulb securely.

6. Reconnect the strand to power.

7. Allow a short period for the flasher bulb to warm and activate.

Depending on the circuit design, one flasher bulb may control a section of the strand rather than every light. The exact number of twinkling sections and the permitted flasher-bulb positions should be confirmed from the included instructions.

Do not remove or install bulbs while the strand is connected to electricity.

Connectable Design

Up to five compatible strands are described as linkable for larger holiday arrangements.

These totals are based on the listed 19.6-foot lighted length and do not include lead wires, plugs, end connectors, or spacing between connected strands.

Connect only identical or explicitly compatible sets. Never exceed the maximum number of linked units or the electrical load printed on the product label.

IP44 Splash Resistance

The light set is described as IP44 rated. This generally indicates protection against objects larger than 1mm and splashing water from different directions. It does not mean the product is fully waterproof, weatherproof in every condition, or suitable for submersion.

For protected outdoor use:

• Connect the lights to a suitable outdoor-rated receptacle.

• Use GFCI protection where required.

• Keep the plug and electrical connections away from standing water.

• Do not immerse or pressure-wash the lights.

• Keep connections above ground and protected according to the instructions.

• Avoid gutters, drains, sprinklers, and flood-prone areas.

• Secure the wire against movement in wind.

• Disconnect or remove the lights during severe weather when recommended.

• Allow the complete set to dry before storage.

Confirm whether IP44 applies to the strand, sockets, end connector, plug, and complete assembled product. The supplied description specifically instructs users to keep the plug away from water.

Green-Wire Construction

The green wire is designed to blend with Christmas-tree branches, garlands, wreaths, shrubs, and other foliage.

For safe installation:

• Uncoil the strand gently before decorating.

• Test the lights before installation.

• Do not pull, stretch, or carry the set by its wire.

• Avoid sharp bends near bulbs, sockets, and plugs.

• Use insulated holiday-light clips or soft ties.

• Do not secure the wire with nails, staples, screws, or tacks.

• Keep the cord away from doors, walkways, sharp edges, and heat sources.

• Do not place the wire where it may be pinched or crushed.

General Setup

1. Remove the strand and accessories from the package.

2. Fully uncoil the wire.

3. Inspect the bulbs, sockets, cord, plug, fuses, and end connector.

4. Replace any loose, broken, or missing bulbs with the specified type.

5. Test the complete strand before decorating.

6. Install the lights with suitable clips or soft fasteners.

7. Connect additional compatible strands if needed.

8. Do not exceed five linked units.

9. Keep plugs and connectors protected from moisture.

10. Install a flasher bulb only if a twinkling display is desired.

Incandescent bulbs can become hot during operation. Keep the set away from paper, fabric, dried foliage, and other materials that may trap heat or ignite.

Product Specifications

• Product Type: Christmas mini string lights

• Holiday Lighting Style: Listed as bubble lights

• Bulb Type: Incandescent

• Bulb Colors: Blue and clear

• Wire Color: Green

• Number of Lights: 100

• Nominal Strand Length: 20 feet

• Listed Lighted Length: 19.6 feet

• Bulb Spacing: Approximately 2.5 inches

• Standard Function: Steady on

• Optional Function: Twinkling with flasher bulb

• Included Flasher Bulbs: 2

• Maximum Linkable Units: 5

• Listed Bulb Rating: 2.5V/0.425W

• Listed Total Wattage: 1 watt

• Listed Weather Rating: IP44

• Recommended Location: Indoor

• Outdoor Use: Also described as suitable

• Power Type Field: Battery

• Apparent Power Method: Plug-in electrical

• Listed Feature: Shatterproof

• Listed Average Bulb Life: Approximately 2,500 hours

• Safety Claim: UL listed or UL certified

• Assembled Product Weight: 0.5 pound

• Included Accessories: Extra bulbs and fuses

• Suitable Occasions: Christmas, Halloween, Hanukkah, New Year’s, parties, and winter events

The “Bubble Lights” classification appears inconsistent with the product description. Traditional bubble lights use liquid-filled decorative tubes, while this product is described as an incandescent mini-light string.

Important Specification Conflicts

These conflicts should be resolved from the exact carton, electrical tag, plug label, and instruction sheet before the listing is published.

What’s Included

Based on the supplied information:

• 1 × Green-wire incandescent light strand

• 100 × Installed blue-and-clear mini bulbs

• 2 × Red-tipped flasher bulbs

• Extra replacement bulbs

• Extra plug fuses

• Integrated male plug and end connector

The exact number and colors of spare bulbs, fuse rating, lead-wire length, and instruction-sheet contents are not specified.

Replacing a Bulb

1. Disconnect the strand from electricity.

2. Allow the bulbs to cool.

3. Identify the failed or damaged bulb.

4. Hold the plastic bulb base rather than pulling the glass.

5. Remove the bulb and base carefully.

6. Install only a replacement with the exact specified voltage and wattage.

7. Make sure the replacement is fully seated.

8. Reconnect the strand and test it.

Do not operate the strand with missing bulbs or empty sockets unless the manufacturer explicitly permits it. Using an incorrectly rated bulb can cause premature failure, overheating, or circuit damage.

Replacing a Plug Fuse

If the strand stops operating:

1. Disconnect it from the outlet.

2. Confirm that all bulbs are seated correctly.

3. Open the fuse-access cover on the plug if provided.

4. Remove the fuse using the method shown in the instructions.

5. Install only a fuse of the exact specified type and rating.

6. Close the fuse compartment completely.

7. Reconnect and test the lights.

The description mentions a 3A fuse, but its exact voltage, dimensions, and required replacement specification should be verified from the plug label. Never bypass a fuse or replace it with one of a higher rating.

Care and Storage

1. Disconnect the strand from power.

2. Allow all bulbs to cool.

3. Remove clips and fasteners carefully.

4. Wipe the bulbs and wire with a soft, dry cloth.

5. Allow the complete set to dry.

6. Replace damaged bulbs with correctly rated replacements.

7. Coil the strand loosely around a storage reel or sturdy card.

8. Protect bulbs, plugs, and connectors from crushing.

9. Store the set indoors in a clean, dry location.

Do not store the lights while wet, twist the wire tightly, or place heavy items on the bulbs.

Safety Information

• Read the included instructions and product labels before use.

• Verify the required input voltage and frequency.

• Inspect the complete set before every installation.

• Do not use lights with cracked bulbs, damaged sockets, exposed conductors, or a damaged plug.

• Disconnect power before installation, adjustment, bulb replacement, fuse replacement, cleaning, or storage.

• Do not touch hot bulbs.

• Keep incandescent bulbs away from combustible materials.

• Do not exceed five connected strands.

• Connect only compatible light sets.

• Keep plugs and connections away from standing water.

• Do not handle electrical parts with wet hands.

• Do not install wiring with nails, staples, screws, or tacks.

• Do not run the cord through doors, windows, walls, ceilings, or floors.

• Keep children and pets away from bulbs, cords, fuses, and small replacement parts.

• Do not cut, splice, shorten, or modify the strand.

• Stop using the lights if the plug, wire, sockets, or bulbs become unusually hot.

• Do not leave operating incandescent lights unattended unless the instructions permit it.

Information to Confirm Before Publication

Verify the following from the exact product package or sample:

• Brand name

• Model number or SKU

• Exact bulb-color pattern

• Number of blue bulbs

• Number of clear bulbs

• Whether the clear bulbs produce warm white light

• Total strand length

• Exact lighted length

• Lead-wire and tail-wire lengths

• Bulb spacing

• Input voltage and frequency

• Actual total wattage

• Plug type

• Fuse location, size, voltage, and amperage

• Whether the bulb rating is exactly 2.5V/0.425W

• Whether the product is plug-in rather than battery operated

• Exact flasher-bulb installation positions

• Whether one or both flasher bulbs are used simultaneously

• Number of independently twinkling sections

• Maximum connected wattage

• Whether five strands may be connected on the same outlet

• Exact components covered by the IP44 rating

• Indoor/outdoor certification of the plug and connectors

• Bulb material

• Basis for the shatterproof claim

• Exact UL listing or certification information

• Number and type of replacement bulbs

• Number and type of replacement fuses

• Operating-temperature range

• Warranty terms

• Country of origin

Do not advertise battery operation, 1-watt total consumption, a fuse inside every bulb, traditional bubble-light construction, full waterproofing, or shatterproof glass until those claims have been verified.

Frequently Asked Questions

How many bulbs are included?

The strand includes 100 incandescent mini bulbs.

What colors are the lights?

The supplied description identifies blue and clear bulbs on green wire. “Clear” incandescent bulbs generally produce a warm white appearance, but the exact color pattern should be verified.

How long is the strand?

The nominal length is approximately 20 feet, with a listed lighted length of 19.6 feet.

How far apart are the bulbs?

The listed bulb spacing is approximately 2.5 inches.

Do the lights twinkle?

They can produce a twinkling effect when a regular bulb is replaced with one of the included red-tipped flasher bulbs. Without a flasher bulb, the strand operates steadily.

How many strands can be connected?

Up to five compatible strands are listed as linkable. Follow the electrical tag and never exceed the permitted connected load.

Are the lights battery operated?

The attribute field says “Battery,” but the descriptions of a plug, fuses, and linkable strands indicate corded-electric operation. Confirm the exact power source before publication.

Are batteries included?

No battery type or battery quantity is provided. The product appears to be plug-in rather than battery powered.

Can the lights be used outdoors?

The description claims indoor and outdoor use with an IP44 rating. Confirm that the entire set, including its plug and connectors, is marked for outdoor use.

Are the lights waterproof?

No. IP44 indicates splash resistance under specified conditions, not complete waterproofing or suitability for submersion. Keep the plug and connections away from water.

Are these traditional bubble lights?

Probably not. They are described as incandescent mini string lights. Traditional bubble lights use liquid-filled tubes, which are not mentioned.

Are replacement bulbs included?

Yes. Extra bulbs are listed as included, although their exact number and colors are not supplied.

Are replacement fuses included?

Yes. Extra fuses are listed as included. Confirm their exact rating before use.

Are the bulbs shatterproof?

The product is described as shatterproof, but the bulb material is not identified. Verify this claim because conventional incandescent mini bulbs are often made of glass.

What is the total wattage?

A separate attribute lists 1 watt, but 100 bulbs rated at 0.425 watt each would suggest approximately 42.5 watts. The electrical label should be treated as authoritative.

Can the lights remain installed all year?

They are promoted for multiple holidays, but that does not necessarily mean permanent outdoor installation. Follow all weather, temperature, and storage limits in the manufacturer’s instructions.

Related Searches

blue and clear Christmas lights

100-count incandescent mini lights

20-foot Christmas string lights

blue clear mini light strand

green-wire Christmas lights

twinkling incandescent lights

Christmas lights with flasher bulbs

blue white holiday string lights

indoor outdoor mini lights

IP44 Christmas lights

connectable incandescent light strands

Christmas tree mini lights

wreath and garland lights

blue patio Christmas lights

Hanukkah string lights

Halloween blue string lights

100-light green-wire strand

replacement-bulb Christmas lights

plug-in holiday fairy lights

traditional incandescent Christmas lights