2-Pack 72FT Solar Christmas Fairy Lights, 200 LED Outdoor Copper Wire String Lights

  • $26.99
    Unit price per 
  • Save $23
Shipping calculated at checkout.


2-Pack 72FT Solar Christmas Fairy Lights, 200 LED Outdoor Copper Wire String Lights with 8 Modes

Create a warm, colorful, or classic holiday display across gardens, patios, porches, fences, trees, lawns, and event spaces with this two-pack of solar-powered fairy lights. Each flexible copper-wire strand measures approximately 72 feet and contains 200 LEDs, providing 400 LEDs and 144 feet of lighting across the complete set.

The included solar panels charge the rechargeable batteries during daylight, eliminating the need for an outdoor outlet or household power connection.

Key Features

  • Two solar fairy-light strings

  • 200 LEDs per string

  • 400 LEDs across the complete two-pack

  • Approximately 72 feet per string

  • Approximately 144 feet combined

  • Flexible copper-wire construction

  • Eight selectable lighting modes

  • Solar-powered cordless operation

  • 1.2V 600mAh rechargeable battery for each light set

  • 2V 150mA solar panel for each light set

  • Listed charging time of approximately six hours

  • IP65-rated outdoor construction

  • Approximately 10cm or 3.94-inch bulb spacing

  • Approximately 2m or 6.56-foot lead wire

  • Solar panels and ground stakes included

  • Available in warm white or multicolor

  • Suitable for Christmas, weddings, parties, gardens, patios, and seasonal displays

Two Independent 200-LED Light Strings

The package includes two complete solar string-light sets. Based on the supplied specifications, each set contains:

  • One 72-foot copper-wire light strand

  • 200 integrated LEDs

  • One solar panel

  • One rechargeable battery

  • One ground stake

  • Separate power and mode controls

Together, the package provides 400 LEDs across approximately 144 feet of lighting. Because each strand has its own solar panel, the two sets can be installed in different locations, provided both panels receive adequate sunlight.

The strands should not be electrically joined unless the manufacturer specifically authorizes that configuration.

Flexible Copper Wire

The lightweight copper wire can be shaped gently around many decorative surfaces, including:

  • Trees and shrubs

  • Railings

  • Fences

  • Pergolas

  • Wreaths and garlands

  • Porch columns

  • Garden features

  • Patio structures

  • Wedding arches

  • Tabletop arrangements

The wire’s flexibility makes it suitable for curved, wrapped, or loosely folded displays. Avoid repeated sharp bends, tight knots, staples, nails, or excessive pulling, as these can damage the internal conductors or protective coating.

Do not use the wire to support heavy ornaments or other objects.

Eight Lighting Modes

Use the mode control to select from eight decorative effects:

  1. Combination

  2. Fireflies or flashing

  3. Waves

  4. Fading

  5. Chasing

  6. Slow fade

  7. Twinkle

  8. Steady on

Animated modes can add movement to parties and Christmas displays, while steady-on mode provides continuous decorative illumination.

The supplied mode names differ slightly from the standard sequence found on many eight-mode controllers. Confirm the exact order on the included controller or instructions. Mode memory, brightness adjustment, timer operation, and remote control are not specified.

Solar-Powered Operation

Each light string uses a 2V 150mA solar panel to charge a 1.2V 600mAh rechargeable battery. No outdoor outlet, extension cord, or household electricity is required during normal operation.

For effective charging:

  1. Uncoil the lights and inspect all components.

  2. Attach the solar panel to its ground stake.

  3. Position the panel in an area that receives direct sunlight.

  4. Set the power switch to “ON.”

  5. Allow approximately six hours of charging under suitable sunlight.

  6. Keep the panel clean and free from shade.

  7. Test the lights after the surrounding area becomes dark.

Solar performance depends on sunlight intensity, season, cloud cover, temperature, panel angle, battery condition, and the selected lighting mode. Six hours of cloudy or indirect daylight may not provide the same charge as six hours of direct sunlight.

The expected nighttime operating duration is not provided.

Automatic Nighttime Lighting

Solar lights of this design generally use a light sensor to illuminate after dark and turn off during daylight, provided the power switch remains on.

If the lights do not activate at night:

  • Confirm that the switch is set to “ON.”

  • Make sure the panel received sufficient direct sunlight.

  • Check that nearby porch or streetlights are not shining on the sensor.

  • Remove dirt, leaves, frost, or snow from the panel.

  • Verify that the wiring and connections are undamaged.

  • Allow the battery another full daylight charging cycle.

Covering the solar panel briefly can help simulate darkness when testing the lights during the day.

IP65 Outdoor Protection

The product is listed as IP65, indicating protection against dust and low-pressure water jets under applicable test conditions. This makes the lights suitable for normal outdoor decorating in gardens, yards, patios, and similar locations.

For safe and reliable use:

  • Do not submerge the lights or solar panels.

  • Do not install them in standing water.

  • Avoid flood-prone areas and concentrated roof runoff.

  • Do not clean them with a pressure washer.

  • Keep switches, housings, and connections properly closed.

  • Remove the lights during severe storms or damaging winds.

  • Discontinue use if the wire coating, panel, housing, or controls become damaged.

Confirm whether the stated IP65 rating applies to the complete system, including the solar panel, controller, switches, wire connections, and battery housing.

Warm White or Multicolor Options

The supplied information identifies two available lighting colors:

  • Warm white

  • Multicolor

Warm white produces a soft, traditional glow suitable for weddings, patios, and classic Christmas displays. Multicolor lighting creates a brighter, more playful effect for parties, lawns, and festive holiday decorating.

White is mentioned elsewhere in the supplied description, but it is not included in the final specification line. Confirm the exact selectable product variants before publishing.

The lights do not appear to change between warm white and multicolor on the same strand. The customer should select the desired color variant when ordering.

Dimensions and Spacing

Each string-light set has the following listed measurements:

  • Total length: Approximately 72 feet

  • LED quantity: 200

  • Bulb spacing: Approximately 3.94 inches or 10cm

  • Solar-panel-to-first-light lead: Approximately 6.56 feet or 2m

The wording “length from solar panel to first stake” appears to refer to the lead wire between the solar panel and the first illuminated section.

The listed 72-foot total length may include the 6.56-foot lead wire. If so, the illuminated portion would be shorter than 72 feet. Confirm whether the stated total refers to the complete end-to-end length or only the illuminated section.

Recommended Uses

These solar fairy lights can be used to decorate:

  • Gardens

  • Yards and lawns

  • Patios

  • Porches

  • Fences

  • Gates

  • Trees and shrubs

  • Pergolas

  • Balconies

  • Doorways

  • Wedding arches

  • Party areas

  • Christmas displays

  • Holiday centerpieces

  • Outdoor dining spaces

They are decorative accent lights and should not be relied upon as primary landscape, pathway, emergency, or security lighting.

Installation Guide

  1. Remove both light sets from the package.

  2. Inspect the wires, LEDs, panels, stakes, switches, and housings.

  3. Uncoil each strand carefully.

  4. Place the light strings in their intended locations before securing them.

  5. Wrap or shape the copper wire using gentle curves.

  6. Insert each solar-panel stake into suitable soil.

  7. Angle both panels toward direct sunlight.

  8. Set each power switch to “ON.”

  9. Select the preferred lighting mode.

  10. Allow approximately six hours of direct-sun charging.

  11. Check operation after dark.

Do not hammer the solar-panel stakes. Create a pilot hole first if the soil is rocky, compacted, dry, or frozen.

When installing the wire:

  • Do not pull it tightly between supports.

  • Do not sharply crease or twist it.

  • Do not pierce it with staples, nails, or screws.

  • Do not trap it in doors, windows, or gates.

  • Keep it away from moving equipment and sharp edges.

  • Use suitable non-damaging clips or loose ties when needed.

Specifications

  • Product Type: Solar fairy string lights

  • Package Quantity: Two complete light sets

  • LEDs per String: 200

  • Total LED Quantity: 400

  • Length per String: Approximately 72 feet

  • Combined Length: Approximately 144 feet

  • LED Spacing: Approximately 3.94 inches or 10cm

  • Lead-Wire Length: Approximately 6.56 feet or 2m

  • Wire Material: Copper

  • Available Light Colors: Warm white and multicolor

  • Lighting Modes: Eight

  • Power Source: Solar

  • Rechargeable Battery: 1.2V 600mAh per set

  • Solar Panel: 2V 150mA per set

  • Listed Charging Time: Approximately six hours

  • Listed Luminous Flux: 6 lumens; measurement basis not specified

  • Water-Resistance Rating: IP65

  • Controls: Power on/off and mode buttons

  • Installation: Solar panel with ground stake

  • Recommended Use: Outdoor seasonal and event decorating

The supplied information does not identify the brand, model number, exact illuminated length, battery chemistry, battery replaceability, nighttime runtime, wire gauge, solar-panel dimensions, operating-temperature range, mode-memory function, timer, warranty, or expected LED lifespan.

Luminous-Flux Clarification

A luminous-flux value of 6 lumens is listed, but it is unclear whether this applies to:

  • One LED

  • One 200-LED strand

  • Both strands together

  • A particular lighting mode

  • A laboratory test configuration

Do not advertise the lights as producing a verified total of 6 lumens until the measurement basis is confirmed.

Safety and Handling

  • Inspect both light sets before installation.

  • Do not use a set with damaged wire, insulation, LEDs, controls, or solar-panel housing.

  • Do not cut, splice, extend, or electrically join the strands.

  • Do not staple, nail, pierce, or crush the copper wire.

  • Keep the lights away from flames, heaters, and excessive heat.

  • Do not use the wire as a structural support.

  • Keep small components and stake points away from children and pets.

  • Check for underground pipes, cables, and irrigation lines before inserting stakes.

  • Keep the lights away from lawn mowers, trimmers, snow blowers, and other equipment.

  • Do not install the wire where it creates a trip or entanglement hazard.

  • Do not submerge any part of the lighting system.

  • Follow all instructions and warnings included with the product.

These lights are decorative products, not toys or safety-rated illumination.

Care and Maintenance

Switch the lights off before cleaning, moving, or inspecting them.

Clean each solar panel periodically using a soft, lightly damp cloth. Remove dust, pollen, leaves, snow, frost, and other debris that may reduce charging efficiency.

Do not use:

  • Pressure washers

  • Abrasive cleaners

  • Bleach

  • Solvents

  • Sharp cleaning tools

  • Immersion cleaning

Check the wire coating, LED connections, switches, battery housings, panels, and stakes regularly for cracking, corrosion, looseness, or water entry.

Seasonal Storage

After the holiday or event:

  1. Switch both light sets off.

  2. Remove the solar panels and stakes carefully.

  3. Do not pull the stakes from the ground by their wires.

  4. Clean and dry all components.

  5. Coil each copper-wire strand loosely.

  6. Avoid sharp folds, tight knots, or heavy pressure.

  7. Protect the solar-panel surfaces from scratches.

  8. Store each set in a clean, dry container.

  9. Do not place heavy objects on the lights or panels.

Rechargeable batteries can lose capacity during extended storage. Follow the manufacturer’s instructions for maintenance charging and long-term battery care.

What’s Included

  • 2 Ă— 200-LED solar string lights

  • 2 Ă— Solar panels

  • 2 Ă— Ground stakes

A wall adapter, USB cable, extension cord, remote control, separate timer, mounting clips, replacement batteries, and storage bag are not identified as included.

Frequently Asked Questions

How many lights are included?

The package contains two strands with 200 LEDs each, providing 400 LEDs in total.

How long is each strand?

Each string is listed as approximately 72 feet long. The two-pack provides approximately 144 feet combined.

Does the 72-foot measurement include the lead wire?

That is not specified. The approximately 6.56-foot section between the solar panel and first light may be included in the listed total length.

What colors are available?

Warm white and multicolor are listed as product options. Confirm whether standard white is also available before publishing it as a selectable variant.

How are the lights powered?

Each strand has its own solar panel and rechargeable battery.

What are the battery specifications?

Each light set is listed with a 1.2V 600mAh rechargeable battery.

How long does charging take?

The listed charging time is approximately six hours under suitable sunlight. Cloudy weather, shade, and winter conditions can extend charging time.

How long do the lights stay on?

Nighttime runtime is not provided. It will depend on sunlight, battery condition, temperature, and lighting mode.

Do the lights turn on automatically?

Solar lights of this type generally turn on automatically after dark when their power switches are on and the panels are not exposed to another bright light source.

How many lighting modes are available?

Eight modes are listed, including combination, fireflies, waves, fading, chasing, slow fade, twinkle, and steady on.

Can the two strands use different modes?

Yes, if each included solar panel has its own mode controller as indicated by the separate light-set configuration.

Are the lights waterproof?

They are listed as IP65 for outdoor use. They should not be submerged or installed in standing water.

Can the copper wire be bent?

Yes. It can be shaped gently around decorative surfaces, but sharp folds, tight knots, repeated creasing, and excessive tension should be avoided.

Can the strands be cut or connected together?

No such capability is specified. Do not cut, splice, or connect the strands unless the manufacturer expressly permits it.

Are the batteries replaceable?

Battery replaceability is not stated. Do not open a sealed battery housing unless the instructions specifically provide a replacement procedure.

Are the LEDs replaceable?

LED replaceability is not specified. Treat them as integrated components.

Related Searches

solar Christmas fairy lights

2-pack solar string lights

72-foot outdoor fairy lights

200 LED solar lights

400 LED Christmas lights

warm white solar copper-wire lights

multicolor solar garden lights

eight-mode outdoor string lights

IP65 solar fairy lights

solar patio decorations

solar lights for trees and shrubs

outdoor wedding fairy lights

Christmas garden string lights

cordless porch decorations

solar-powered copper-wire lights

water-resistant holiday lights

solar yard decorations

fairy lights with ground stakes

solar party lights

outdoor Christmas lighting


We Also Recommend