Member’s Mark Stainless Steel & Glass LED Solar Path Lights, 20 Lumens, 4-Pack

Add warm, welcoming illumination to walkways, gardens, patios, and landscaped areas with the Member’s Mark LED Solar Path Lights. This set includes four outdoor lights, each producing 20 lumens through a permanent warm-white LED.

During the day, the integrated solar panels charge the included rechargeable batteries. After dark, the lights switch on automatically and can operate for up to eight hours under suitable charging conditions. Stainless steel construction, glass lenses, and a matte-black finish create a clean look that coordinates easily with a variety of outdoor spaces.

Key Features

• Set of four solar path lights

• 20 lumens per light

• Permanent warm-white LEDs

• Automatic dusk-to-dawn operation

• Up to eight hours of nightly illumination

• Solar powered with no electrical wiring required

• Rechargeable batteries included

• Stainless steel construction

• Genuine glass lenses

• Glass refracts a decorative pattern onto the ground

• Matte-black finish

• Posts and ground stakes included

• Minimal assembly required

• Each light measures 20.5 inches high

• Designed for outdoor pathway and landscape lighting

• Limited one-year manufacturer warranty

20 Lumens per Light

Each path light produces 20 lumens of warm-white illumination, providing visible accent and guidance lighting around outdoor walking areas.

These lights are intended for decorative landscape illumination and pathway definition. They are not designed to replace high-output security lighting, floodlights, or code-required architectural lighting.

Decorative Glass Lens

A glass lens surrounds each permanent LED and refracts the light into an elegant pattern on the ground. The resulting effect adds visual interest around paths, garden beds, patios, and landscaped borders.

Because the projected pattern depends on placement and surrounding surfaces, its appearance may vary on grass, mulch, stone, concrete, or uneven ground.

Solar Charging with Automatic Operation

Each light has an integrated solar panel that charges its rechargeable battery during daylight hours. A built-in light sensor automatically turns the LED on after dark and off again when daylight returns.

No household wiring, extension cord, or external electrical outlet is required.

Up to Eight Hours of Runtime

After receiving sufficient direct sunlight, the lights can operate for up to eight hours at night. Actual runtime may vary based on:

• Hours of direct sunlight

• Seasonal daylight changes

• Cloud cover and weather

• Shade from trees, buildings, or landscaping

• Solar-panel cleanliness

• Battery age and condition

• Outdoor temperature

• Location and orientation of each light

For the best performance, place the lights where their solar panels receive several hours of unobstructed direct sunlight each day.

Stainless Steel and Glass Construction

The lights combine stainless steel housings with glass lenses for a more substantial appearance than all-plastic landscape lights. A matte-black finish helps them blend into traditional, modern, and transitional outdoor settings.

Routine cleaning and proper seasonal care can help maintain their appearance and solar-charging performance.

Cord-Free Landscape Placement

Use the four lights together along one pathway or divide them among multiple outdoor areas, including:

• Front walkways

• Garden paths

• Flower beds

• Driveway edges

• Patios

• Yard borders

• Poolside landscaping

• Entry paths

• Mailbox areas

• Outdoor gathering spaces

When installing near a pool, place the lights only in surrounding soil or landscaping. They are not designed for underwater use.

Specifications

• Brand: Member’s Mark

• Product type: Solar path light

• Quantity: Four lights

• Light output: 20 lumens per light

• Light color: Warm white

• Light source: Permanent integrated LED

• Replaceable bulb: No

• Power source: Solar

• Energy storage: Rechargeable batteries

• Batteries included: Yes

• Automatic operation: On at night and off during daylight

• Maximum advertised runtime: Up to 8 hours

• Housing material: Stainless steel

• Lens material: Glass

• Finish: Matte black

• Installation type: Ground stake

• Wiring required: No

• Assembly required: Minimal

• Dimensions per light: 6.1" L × 6.1" W × 20.5" H

• Listed product weight: 1.19 lb.

• Recommended use: Outdoor pathway and landscape lighting

• Warranty: Limited one-year manufacturer warranty from date of purchase

The supplied information does not specify whether the listed 1.19-pound weight applies to one light or the complete set.

What’s Included

• Four solar top housings

• Four glass lenses

• Four posts

• Four ground stakes

• Solar rechargeable batteries

• Assembly instructions

Installation Instructions

1. Assemble each solar top, glass lens, post, and ground stake according to the included instructions.

2. Select an outdoor location that receives direct sunlight.

3. Loosen compacted soil before inserting the stake.

4. Hold the stake—not the upper light housing—when pressing it into the ground.

5. Do not hammer directly on the solar housing, glass lens, or post.

6. Activate the power switch or remove the battery tab if required by the instructions.

7. Allow the lights to charge in direct sunlight before evaluating their nighttime performance.

For hard or dry soil, moisten and loosen the ground before installation. Do not force the stake into rock, concrete, or heavily compacted soil.

Placement Tips

• Avoid locations shaded by trees, fences, roofs, or buildings.

• Do not place the solar panel directly beneath bright nighttime fixtures.

• Space the lights according to the desired ground-light pattern.

• Keep the solar panel facing upward and free from debris.

• Reposition the lights seasonally if the available sunlight changes.

• Install them where they will not create a tripping hazard or be struck by lawn equipment.

Artificial light shining on the solar sensor at night may prevent the LED from turning on automatically.

Care and Maintenance

• Wipe the solar panels regularly with a soft, damp cloth.

• Keep leaves, dust, snow, and other debris off the panels.

• Clean the glass lenses gently to maintain the projected light pattern.

• Do not use abrasive pads, chemical solvents, or harsh cleaners.

• Check that posts and stakes remain straight and secure.

• Remove or protect the lights before mowing, edging, or aerating.

• Replace rechargeable batteries only with the type specified in the instructions.

• Recycle used rechargeable batteries according to local requirements.

• Store the lights in a dry location during severe weather or prolonged periods of nonuse when appropriate.

Why They Stand Out

These Member’s Mark path lights combine brighter 20-lumen output with stainless steel housings and genuine glass lenses. The refracting glass creates a decorative pattern on the ground, adding both guidance lighting and visual interest to outdoor spaces.

Solar charging, automatic nighttime operation, included rechargeable batteries, and ground-stake installation make the set easy to add without trenching, wiring, or increasing household electricity use.

Frequently Asked Questions

How many lights are included?

The package includes four complete solar path lights.

How bright is each light?

Each light produces 20 lumens.

What color light do they produce?

They use warm-white LEDs.

Do they turn on automatically?

Yes. The built-in light sensors turn the lights on after dark and off during daylight.

How long do they stay illuminated?

They can provide up to eight hours of light after sufficient solar charging. Actual runtime depends on sunlight, weather, battery condition, and placement.

Are the rechargeable batteries included?

Yes. Solar rechargeable batteries are included.

Can the LED bulbs be replaced?

No. Each light uses a permanent integrated LED designed to operate without routine bulb replacement.

Do the lights require electrical wiring?

No. They are powered by integrated solar panels and rechargeable batteries.

What are the lights made from?

They feature stainless steel housings and glass lenses with a matte-black finish.

What are the dimensions?

Each assembled light measures approximately 6.1 inches long by 6.1 inches wide by 20.5 inches high.

Can they be installed in hard ground?

Loosen or moisten hard soil before inserting the stakes. Do not hammer or force the assembled lights into compacted ground.

Can they be used near a swimming pool?

They may be placed in nearby landscaping, but they are not designed for underwater use or installation where they will be submerged.

What warranty is included?

The lights include a limited one-year manufacturer warranty from the date of purchase, subject to the manufacturer’s terms and proof-of-purchase requirements.